Brother GTX Pre treatment solution (20Kgs / 16 Ltrs) - to be diluted before use

Brother GTX pre treatment solution is supplied in a concentrated solution that must be diluted with distilled water prior to use. The recommended rate is 1 part concentrate to 1 or 2 parts distilled water. If using an automatic pre-treatment machine we recommend a 1 : 2 ratio because automatic machine tend to spray a heavier cover than a hand-held gun. Apply the required amount then allow to soak in or use a foam roller to press the solution into the fabric before heat pressing with a matt finish craft paper sheet. This will help to improve print quality and minimise pre-treatment parks on dark fabrics.